preloader

corrosion behaviors of q345r steel at the initial stage in

corrosion behaviors of q345r steel at the initial stage in

If you have any needs, please send an email to [email protected], or communicate with us online to get a quick quote


If you have any needs, please send an email to [email protected], or communicate with us online to get a quick quote


Formation Mechanisms of Iron Oxide and Iron

The corrosion behavior of mild steel was first investigated in environments with and without H2S at pH 4.0 and 120 C,showing that magnetite is the dominant corrosion product layer in the initial stage of corrosion,due to a much higher saturation value than iron sulfide (mackinawite).

(PDF) Influence of Cu and Mn on corrosion behavior of low

Corrosion rates of 16Mn steel and Cu-Mn weathering steel in a simulated coastal environment are measured by wet/dry cyclic test.The rust layer was observed and analyzed by SEM,XRD and XPS.12345NextFactors other than Dissolved Oxygen Influencing the May 01,2002·Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling.Materials 2018 ,11 (8) ,1462.DOI 10.3390/ma11081462.An Electrochemical Model for Prediction of Corrosion of (2018) Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling.Materials 11 :8,1462.Online publication date 17-Aug-2018.

Atmospheric Corrosion Behavior of Mild Steel in the

The corrosion behaviour of mild steel in the initial stage was studied in simulated pollutant-free atmosphere with relative humidity (RH) of 65%,75% and 95%.The mass gain has a positive linear relationship with the exposure time.It increases significantly with the increase of relative humidity.Atmospheric Corrosion Behavior of Mild Steel in the The corrosion behaviour of mild steel in the initial stage was studied in simulated pollutant-free atmosphere with relative humidity (RH) of 65%,75% and 95%.The mass gain has a positive linear relationship with the exposure time.It increases significantly with the increase of relative humidity.Carbon steel corrosion a review of key surfacethe function of corrosion inhibitors,the reactions at t he interfaces between the corrosive electrolyte and a steel surface,particularly at the initial stages of the corrosion process,need to be described.Naturally,these reactions are strongly aected by the nature and properties of the steel surfaces.It is however seen that the majority of

Cited by 6Publish Year 2018Author Longjun Chen,Junying Hu,Xiankang Zhong,Qiang Zhang,Yan Zheng,Zhi Zhang,Dezhi ZengCorrosion Behaviors of Q345R Steel at the Initial Stage in

5 rows·materials Article Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Cited by 6Publish Year 2018Author Longjun Chen,Junying Hu,Xiankang Zhong,Qiang Zhang,Yan Zheng,Zhi Zhang,Dezhi ZengPits formation and stress corrosion cracking behavior of Apr 15,2020·At the initial stage of the reaction,Q345R is regarded as the anode dissolving part,and a large amount of corrosion products quickly accumulate on the surface.The specimens surface is proved to be rough after corrosion ( Fig.4 ,Fig.7 ( b )),indicating that corrosion products are uneven distributed on specimens surface at the initial stage of the reaction.Cited by 6Publish Year 2018Author Longjun Chen,Junying Hu,Xiankang Zhong,Qiang Zhang,Yan Zheng,Zhi Zhang,Dezhi ZengTitle Corrosion Behaviors of Q345R S Author Longjun Chen,Junying Hu,Xian Subject The ingress of oxygen into pre Keywords oxygen corrosion; low alloy st 5 rows on mdpiCorrosion Behaviors of Q345R Steel at the Initial Stage in The ingress of oxygen into pressure vessels used in oil gas production and transportation could easily result in serious corrosion.In this work,the corrosion behaviors of Q345R steel at the initial stage in 1 wt.% NaCl solution were investigated using electrochemical techniques.The effects of oxygen concentration,temperature and pH on corrosion behaviors were discussed.

Cited by 9Publish Year 2020Author Hailong Dai,Shouwen Shi,Can Guo,Xu ChenJunying Hu's research works Southwest Petroleum

In this work,the corrosion behaviors of Q345R steel at the initial stage in 1 wt.% NaCl solution were investigated using electrochemical techniques.The effects of oxygen concentration Corrosion Behavior for Casing in Producing Well with Water Corrosion leakage became serious due to cyclic sewage injection and continuous increase in water injection pressure.Corrosion behavior for N80 casing was studied during long-term service,using corrosion reaction kettle and weight loss method.The morphology and composition were characterized with laser confocal microscopy (LCM),scan electron microscopy (SEM) and energy disperseCorrosion Behavior of Carbon Steel with Pearlite-Ferrite S environment,respectively [13-14].Wang et al have proposed that the corrosion behaviors of Ni-Cr-Mo laser coating,stainless steel and X70 steel in different simulated solutions with H 2 S/CO 2 [15].The effect of H 2 S impurity on the corrosion behavior of X65 steel in CO 2 system is also investigated,and they have proposed the H 2

Corrosion Behavior of Q235 Steel in Atmospheres Containing

·The characterization of corrosion products formed on a high performance offshore platform steel in the environment containing chloride ions has been investigated by scanning electron microscopy (SEM),X-ray diffraction (XRD),electron probe microanalysis (EPMA) and electrochemical impedance spectroscopy (EIS).The results reveal that the corrosion process can be divided into the initial stage Corrosion behavior of X65 pipeline steel in coastal areas To study the corrosion behavior of pipeline steel in coastal areas,a tidal seawater macro-cell corrosion device was built using a cycle soaking tank and a macro-cell corrosion facility to simulate the corrosion behavior of pipeline steel in a simulated coastal environment (dry and wet alternations during seawater-soil corrosion macro-cell processes).,The corrosion behaviors were studied via Corrosion behavior of high performance offshore platform Jun 01,2015·The characterization of corrosion products formed on a high performance offshore platform steel in the environment containing chloride ions has been investigated by scanning electron microscopy (SEM),X-ray diffraction (XRD),electron probe microanalysis (EPMA) and electrochemical impedance spectroscopy (EIS).The results reveal that the corrosion process can be divided into the initial stage

Corrosion of Steel by Dissolved Carbon Dioxide and Oxygen

Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling.Materials 2018,11 (8) ,1462.https://doi/10.3390/ma11081462; Rosa Vera,Oladis Troconis de Rincón,Margarita Bagnara,Nathalie Romero,Raquel Araya,Sebastián Ossandón.Design method for steel structures in marine environment The general corrosion process of steel structures in marine environment was studied and modelled in order to integrate it in the design procedure according to the semi-probabilistic approach.A statistical predictive model of corrosion was developed on a multi-factorial basis accounting for a wide range of environment and structural parameters.The corrosion loss was modelled by a depth Effect of Impurities on the Corrosion Behavior of CO2 Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling.Materials 2018,11 (8) Effect of exposure angle on the corrosion behavior of X70 steel under supercritical CO 2 and gaseous CO 2 environments.Corrosion Science 2017,121 ,57-71.

Evolution of Corrosion Scale of Pipeline Steel Under High

SEM and XRD were used to investigate the characteristics and evolution of corrosion product.Results indicated that the corrosion rate of pipeline steel decreased and then tended to steady with time.At the initial corrosion stage,the corrosion scale was made mainly of mackinawite crystals with a small amount of FeS crystals.Failure analysis on the oxygen corrosion of the perforated Jan 01,2021·Thus,the corrosion was accelerated as the well depth increased and the oxygen corrosion was severe in the down well.The corrosion product film formed was loose,porous during the oxygen corrosion is easily loosened from the steel surface.The cracks and holes were the channels of the short-circuiting diffusion.Influence of carbon content and microstructure on Feb 01,2009·The direct influence of steel microstructure on corrosion behaviour is reflected in the initial stage of corrosion.Bare 09CuPCrNi corroded faster than bare steels A and B in aqueous NaCl solution.Microstructures in 09CuPCrNi,especially pearlite,appeared on the surface after immersion in the NaCl solution for 4 h (as shown in Fig.10 a).

Initial stage corrosion behavior and mechanism of carbon

Download Citation Initial stage corrosion behavior and mechanism of carbon steel exposed to ozone Because of the strong oxidizing property,ozone in the atmosphere has great disruptive effects Longjun CHEN Graduate Student Southwest Petroleum The ingress of oxygen into pressure vessels used in oil gas production and transportation could easily result in serious corrosion.In this work,the corrosion behaviors of Q345R steel at theModeling of corrosion of steel tubing in CO2 storage - Li Abstract In this work,a mechanistic model was developed to predict the corrosion rate of steel tubing under carbon storage conditions.The model integrates a number of submodels that quantify con

Nonlinear diffusion,bonding,and mechanics of the

steel (austenitic) and Q345R carbon steel (ferritic) owing to their balanced mechanical properties,corrosion resistance,and attrac-tive price.However,it is a great ch allenge to perform the accurate modeling of their interfaces.Part of the reason might be the fact that various kinds of elements (the details are shown in Table S1Some results are removed in response to a notice of local law requirement.For more information,please see here.Some results are removed in response to a notice of local law requirement.For more information,please see here.Previous123456NextAtmospheric Corrosion Behavior of Mild Steel in the The corrosion behaviour of mild steel in the initial stage was studied in simulated pollutant-free atmosphere with relative humidity (RH) of 65%,75% and 95%.The mass gain has a positive linear relationship with the exposure time.It increases significantly with the increase of relative humidity.

The Difference of Corrosion Behavior in Initial Period for

The Difference of Corrosion Behavior in Initial Period for the Hot-Rolled and Cold-Rolled 2205 Duplex Stainless Steel April 2018 DOI 10.20944/preprints201804.0200.v1The Effect of Oxygen in Sweet Corrosion of Carbon Steel Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling Longjun Chen ,J.Hu ,The Effect of Oxygen in Sweet Corrosion of Carbon Steel Corrosion Behaviors of Q345R Steel at the Initial Stage in an Oxygen-Containing Aqueous Environment Experiment and Modeling Longjun Chen ,J.Hu ,

The bond behaviour between concrete and corroded

damage of concrete cover.In the initial stage of corrosion,the bond property is improved because of the increased roughness at the steel bar surface.Afterwards,the further corrosion of reinforcing steel bar leads to the concrete cover cracking and the bond property begins to deteriorate due to theTitle Corrosion Behaviors of Q345R Steel at th Author Longjun Chen,Junying Hu,Xiankang Zhong Subject The ingress of oxygen into pressure vess Keywords oxygen corrosion; low alloy steel; model Created Date 8/17/2018 8:37:07 PM ·In this work,the corrosion behaviors of Q345R steel at the initial stage in 1 wt.% NaCl solution were investigated using electrochemical techniques.The effects of oxygen concentration,temperature and pH on corrosion behaviors were discussed.Simultaneously,a numerical model based on the mixed potential theory was proposed.


If you have any needs, please send an email to [email protected], or communicate with us online to get a quick quote

Post your Inquire

Recent post